Wear And Corrosion Resistant Machining Ceramic Parts Laser
Equipment
Diamond Grinding
Following sintering, the ceramic (now in its ultra-hard state) is
machined using diamond grinding techniques which, together with
lapping and polishing, enable tight tolerances and smooth surface
finishes to be achieved. However, diamond grinding is relatively
expensive, so if as-fired tolerances are acceptable, the overall
cost of the component is reduced.
Product Description
Precision Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Wear And Corrosion Resistant Machining Ceramic Parts
Laser Equipment. We offer this expertise to all of our customers to
ensure the best design and materials are chosen for their specific
application and needs. Wear And Corrosion Resistant Machining
Ceramic Parts Laser Equipment, Typically, our custom technical
ceramic components and parts we supply are used for one of three
main reasons:
Wear And Corrosion Resistant Machining Ceramic Parts Laser
Equipment
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Wear And Corrosion Resistant Machining Ceramic Parts Laser
Equipment
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Wear And Corrosion Resistant Machining Ceramic Parts Laser
Equipment
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Wear And Corrosion Resistant Machining Ceramic Parts Laser
Equipment
Precision Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical Industry
etc. According to actual application and customer's requirement,
the purities vary from 95%-99.7% and the forming methods will be
different. The forming methods applied in our plant include dry
pressing, isostatic pressing, injection moulding, extrusion
moulding. With experienced engineers and talented workers, we are
confident to offer high quality, high precision, complex components
for customers worldwide.
Wear And Corrosion Resistant Machining Ceramic Parts Laser
Equipment
| General Characteristics of Materials: |
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Wear And Corrosion Resistant Machining Ceramic Parts Laser
Equipment |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Wear And Corrosion Resistant Machining Ceramic Parts Laser
Equipment |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .
